Premium 36" Angled Pontoon Boat Seat with Large Pontoon Console

Our Products: Taylor Made Pontoon Seats > Premium Sunset Pontoon Seats > Taylor Made Sunset Pontoon Seats

SKU: 2024021318/2024052639

List Price: $1,125.98

Price: $1,089.99

You Save: $35.99 (3%)

Premium Sunset Angled 36 with pontoon console

Premium 36" Angled Pontoon Boat Seat with Large Pontoon Console

Premium 36" Angled Pontoon Boat Seat with Large Pontoon Console

Premium 36" Angled Pontoon Boat Seat with Large Pontoon Console

(Click to see larger image and other views)

Product Details

The Premium Sunset Collection Pontoon Console helps transform your time on the water with an expertly crafted design and a durable rotationally molded poly frame. This console not only promises resilience against the elements but also enhances the beauty of your pontoon. The spacious locking dry storage compartment of Lippert's pontoon helm station keeps your essentials safe and secure, while built-in cup holders invite you to sip your favorite beverages as you cruise.

FEATURES:

Durable Materials: Crafted using marine-grade polyethylene that won't scuff or warp over time
Stylish and Modern: Each piece is available in popular color tones and showcases modern, distinctive features
Easy Installation: This furniture is easy to install, whether it's a complete boat set or replacing individual pieces

DIMENSIONS:

Durable rotationally molded poly frame
Corrosion-resistant hardware for lasting performance in marine environments
Thick walls to prevent warping
Drainage channels prevent water buildup
Locking dry storage keeps your essentials safe
Built-in cup holders for convenient beverage access
Measures 36.6"L x 37.25"W x 35"H

Premium 36" Angled Pontoon Boat Seat with Large Pontoon Console

(Click to see larger image and other views)

4-Bow Pontoon Bimini Top & Frame Installation Instructions:

For an 8' or 10' top you want to measure from the front of your helm back to 8' or 10'. From there find the middle of your tape measure and mark it-*This is your middle H-Bracket mounting point.* Mount your H-bracket with 1-3/4 Phillips Pan Bolt*
Find a common spot to measure on both sides of your boat and mount the opposite side H-bracket. *Make sure it matches the H-bracket on the other side*
Now you want to locate your left or right sided bow assembly's, there should be four pieces. Here you want to attach the two pieces to each other making one large piece for each side. *The adjustable strut goes in the front and the solid strut goes in the back.* Connect at the H- Bracket point with 1-3/4 Phillips Pan Bolt.
Attach the bow assembly's to your middle H-Bracket and secure with pull pin.
Line up the rear struts perpendicular to the top rail, creating a 90 degree angle. Mark the position for the holes in the H -bracket on the top rail and drill completely through the rail.
Repeat steps 1-5 on the opposite side.
Once both bow assembly's are secure you will start to attach your center bows. *The connector pieces come pre-attached to the center bows* Make sure the bow with the hole cutout goes in the back for the stern light. *You may want to place all bows on the corresponding arms before securing with screws on the bottom side*
Now find your bimini top fabric and lay it out to find the back side. *There will be a hole cutout for the stern light indicating it is the back*
Find your last center bow and zipper that into the last sleeve of the canvas.
Repeat step 9 for bows 2-4.
Open your top and let your front strut hang loose. Directly below mount your front H-Bracket with the 1-3/4 Phillips Pan Bolt like you did in step 5 and secure with the pull pin.
Step back and straighten out the top, ensuring the middle seam is centered on the boat. Finish it off by securing the four snaps, one on each corner.
Congratulations you just installed your new pontoon boat bimini top!

Product Reviews

Write your own review

Rate this product:

Previous Item

Next Item